Tag Archives: drinking straw

Levitation by induction

Leave a reply

Alternating magnetic induce an eddy current and an opposing force.

Levitation by induction

To demonstrate levitation by induction, I have cut down a large transformer to allow an external field. It was 240 V to 110 V and rated at 2 kVA. I use the two windings in series. When run from DC it draws 15 A at 30 V or 450 W. This is enough to levitate a large NIB magnet about 17 cm away. This simple arrangement is not able to give stable levitation however but demonstrates the field strength.
“Continue reading” for further views and explanations. 4 photos and links…
Continue reading →

Levitation of a coil

Leave a reply

A coil being levitated above a copper plate by eddy current repulsion

Eddy current repulsion can provide enough force to give levitation of a coil. The coil was out of a defibrillator output circuit. Don’t know number of turns but the inductance is 10 mH (I think). It is drawing 6.5 A at 100 V AC to get the lift of about 1/2 inch off a 1/4 inch copper plate. It is tethered like a conventional lifter. The power is over 600 W so gets hot quickly.
“Continue reading” for further examples and calculations. 5 photos and links….
Continue reading →